Galvanized steel coils
Galvanized sheets come in a range of specifications, i.e., plain, corrugated, profiled and in coils. The thickness ranges from 0.15 mm to 1.60 mm and is suitable for varied applications. Sheets are normally produced in widths of 900 mm, 1000 mm and 1220 mm and in lengths as required by the customer. Galvanized Plain sheets can be supplied in coils weighing up to 10 metric tones. They are tough and sturdy, bright and gleaming, corrosion-proof and crack-free upon corrugation or fabrication. Continuous annealing at the Galvanizing Line renders a level of hardness that can be varied to suit customer needs and also makes the product ideally suited for a range of uses. Computer controlled processes ensure perfect zinc coating on the strips which helps in effective prevention of rust and also lengthens the product life. The sheets are made in different surface finishes, such as bright, dull or matt as per customer requirements. Spangles can be regular or minimum as required. Hot-dip galvanized sheets can be subjected to bending and forming without the flaking of zinc. They can be easily welded and painted for added protection. Moreover, to suit specific requirements, these sheets can also be of drawing quality such as D/DD/EDD/Lock Forming nature.
Technical Specification:
Zinc Coating: | G90 (Z275) / According to customer requirement. |
Coil weight: | From 2MT to 7 MT |
Spangle: | Regular, Suppressed, Minimized, Zero |
Surface treatment : | Chromate & Non - Chromate, Oiled & Un –Oiled |
Surface : | Skin passed or Non Skin passed. |
Thicknesses: | 0.18 - 1.5 mm |
Coil width: | From 600 mm to 1500 mm. |
Coil ID: | 508 mm |